Monthly Archives: April 2015

Oracle EBS 12.2 Cloning


Introduction to Cloning

Cloning is the process of creating a copy of an existing Oracle E-Business Suite system. The cloning methodology described in this document covers the process used to clone an Oracle E-Business Suite Release 12.2 system.

Note: An Oracle E-Business Suite system can only be cloned to the same, or a higher, major release of a platform (operating system). For example, you can clone a system running on Oracle Solaris 10 to run on Oracle Solaris 11, but it is not supported to clone a system running on Solaris 11 to run on Solaris 10.

There are various scenarios that require cloning an Oracle E-Business Suite system:

  • Standard cloning – Copying an existing Oracle E-Business Suite system, for example, to test updates against a duplicate of a production system.  

Note: Be aware that standard cloning is different from file system cloning. Standard cloning is creating a copy of an Oracle E-Business Suite system using Rapid Clone (for example, cloning a complete Oracle E-Business Suite system to create a test copy from your production environment). In contrast, file system cloning is copying the run file system to the patch file system in online patching, and can only be undertaken with the adop phase=fs_clone command.

  • System scale-up – Adding new machines to an Oracle E-Business Suite system to provide capacity for processing increased workloads. 
  • System transformations – Altering system data or file systems, including actions such as platform migration, provisioning of high availability architectures, and data scrambling (or the preferred alternative of data masking, as described in My Oracle Support Knowledge Document 1437485.1Using Oracle E-Business Suite Release 12.1.3 Template for the Data Masking Pack with Oracle Enterprise Manager 11g). 
  • Patching and upgrading – Delivering new versions of Oracle E-Business Suite components, and providing a mechanism to create rolling environments that minimize downtimes.

An important principle in Oracle E-Business Suite cloning is that the system is cloned, rather than the topology. Producing an exact copy of the patch level and data is much more important than creating an exact copy of topology, as a cloned system must be able to provide the same output to the end user as the Source System. However, while a cloned system does not need to have the full topology of its Source, it must have available all of the topology components that are available to the Source.

Note: When cloning, ensure that you specify the actual locations for the directories involved, so that AD utilities can properly identify the directories afterward. Do not use symbolic links to specify directory locations.

High Level Standard Cloning Process for Application Tier

In addition to cloning the database tier node, the standard cloning process for application tier basically involves the following two key processes:

  1. Copy the application tier node from the Source Run Edition File System to the Target Run Edition File System. 
  2. Copy the application tier node from the Target Run Edition File System to the Target Patch Edition File System.

This high level cloning process specific to application tier can be illustrated in the following diagram:

  1. Prepare the Source System database tier for cloning
    1. Log on to the Source System as the oracle user.
    2. Source the Database tier environment file.
    3. Execute the following commands:

$ cd <RDBMS ORACLE_HOME>/appsutil/scripts/<CONTEXT_NAME> 
$ perl adpreclone.pl dbTier

[oracle@source_dbhost CRP1_source_dbhost]$ perl adpreclone.pl dbTier

                     Copyright (c) 2011, 2014 Oracle Corporation

                        Redwood Shores, California, USA
Oracle E-Business Suite Rapid Clone 

                                 Version 12.2 

                      adpreclone Version 120.31.12020000.16

Enter the APPS User Password:

Running:

perl /u01/install/PROD/11.2.0/appsutil/bin/adclone.pl java=/u01/install/PROD/11.2.0/appsutil/jre mode=stage stage=/u01/install/PROD/11.2.0/appsutil/clone component=dbTier method=CUSTOM dbctx=/u01/install/PROD/11.2.0/appsutil/CRP1_source_dbhost.xml showProgress

Beginning database tier Stage – Tue Mar 31 16:22:17 2015

/u01/install/PROD/11.2.0/appsutil/jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=false
-Doracle.installer.oui_loc=/u01/install/PROD/11.2.0/oui
-classpath /u01/install/PROD/11.2.0/lib/xmlparserv2.jar:
/u01/install/PROD/11.2.0/jdbc/lib/ojdbc6.jar:
/u01/install/PROD/11.2.0/appsutil/java:
/u01/install/PROD/11.2.0/oui/jlib/OraInstaller.jar:
/u01/install/PROD/11.2.0/oui/jlib/ewt3.jar:
/u01/install/PROD/11.2.0/oui/jlib/share.jar:
/u01/install/PROD/11.2.0/oui/jlib/srvm.jar:
/u01/install/PROD/11.2.0/jlib/ojmisc.jar   oracle.apps.ad.clone.StageDBTier -e /u01/install/PROD/11.2.0/appsutil/CRP1_source_dbhost.xml -stage /u01/install/PROD/11.2.0/appsutil/clone -tmp /tmp -method CUSTOM    -showProgress

APPS Password :

Log file located at /u01/install/PROD/11.2.0/appsutil/log/CRP1_source_dbhost/StageDBTier_03311622.log

–     50% completed      

Completed Stage…

Tue Mar 31 16:22:47 2015

[oracle@source_dbhost CRP1_source_dbhost]$ 

  1. Prepare the Source System application tier for cloning
  1. Log on to the primary node of the Source System as the applmgr user.
  2. Source the environment file of the Run Edition File system.

    You can use the following command to confirm that the environment variable FILE_EDITION points to the Run Edition File System:

$ echo $FILE_EDITION
It should return the value: run

  1. Execute the following commands:

[root@source_appshost ~]# su – applmgr

 

  E-Business Suite Environment Information

  —————————————-

  RUN File System           : /u01/install/APPS/fs1/EBSapps/appl
  PATCH File System         : /u01/install/APPS/fs2/EBSapps/appl
Non-Editioned File System : /u01/install/APPS/fs_ne
DB Host: source_dbhost.domain  Service/SID: CRP1

 E-Business Suite Environment Setting
 ————————————

  – Enter [R/r] for sourcing Run File System Environment file, or

  – Enter [P/p] for sourcing Patch File System Environment file, or

  – Enter anything else to exit

Please choose the environment file you wish to source [R/P]:R

Sourcing the RUN File System …

[applmgr@source_appshost ~]$ cd $ADMIN_SCRIPTS_HOME

[applmgr@source_appshost scripts]$ perl adpreclone.pl appsTier

                     Copyright (c) 2011, 2014 Oracle Corporation

                        Redwood Shores, California, USA

                        Oracle E-Business Suite Rapid Clone

                                 Version 12.2

                      adpreclone Version 120.31.12020000.16

Enter the APPS User Password:

Enter the Weblogic AdminServer password :

Checking the status of the Oracle WebLogic Administration Server….

Running perl /u01/install/APPS/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/adProvisionEBS.pl ebs-get-serverstatus -contextfile=/u01/install/APPS/fs1/inst/apps/CRP1_source_appshost/appl/admin/CRP1_source_appshost.xml -servername=AdminServer -promptmsg=hide

 

The Oracle WebLogic Administration Server is up.

 

Running:

perl /u01/install/APPS/fs1/EBSapps/appl/ad/12.0.0/bin/adclone.pl java=/u01/install/APPS/fs1/EBSapps/comn/util/jdk64 mode=stage stage=/u01/install/APPS/fs1/EBSapps/comn/clone component=appsTier
method=appctx=/u01/install/APPS/fs1/inst/apps/CRP1_source_appshost/appl/admin/CRP1_source_appshost.xml showProgress

Setting the wls environment

Beginning application tier Stage – Thu Mar 19 09:47:15 2015

/u01/install/APPS/fs1/EBSapps/comn/util/jdk64/bin/java -Xmx600M -DCONTEXT_VALIDATED=false -Doracle.installer.oui_loc=/oui
-classpath /u01/install/APPS/fs1/FMW_Home/webtier/lib/xmlparserv2.jar:
/u01/install/APPS/fs1/FMW_Home/webtier/jdbc/lib/ojdbc6.jar:
/u01/install/APPS/fs1/EBSapps/comn/java/classes:
/u01/install/APPS/fs1/FMW_Home/webtier/oui/jlib/OraInstaller.jar:
/u01/install/APPS/fs1/FMW_Home/webtier/oui/jlib/ewt3.jar:
/u01/install/APPS/fs1/FMW_Home/webtier/oui/jlib/share.jar:
/u01/install/APPS/fs1/FMW_Home/webtier/../Oracle_EBS-app1/oui/jlib/srvm.jar:
/u01/install/APPS/fs1/FMW_Home/webtier/jlib/ojmisc.jar:
/u01/install/APPS/fs1/FMW_Home/wlserver_10.3/server/lib/weblogic.jar:
/u01/install/APPS/fs1/FMW_Home/oracle_common/jlib/obfuscatepassword.jar  oracle.apps.ad.clone.StageAppsTier -e /u01/install/APPS/fs1/inst/apps/CRP1_source_appshost/appl/admin/CRP1_source_appshost.xml -stage /u01/install/APPS/fs1/EBSapps/comn/clone -tmp /tmp -method CUSTOM   -showProgress -nopromptmsg

Log file located at /u01/install/APPS/fs1/inst/apps/CRP1_source_appshost/admin/log/clone/StageAppsTier_03190947.log

\     20% completed

Completed Stage…

Thu Mar 19 09:55:17 2015

[applmgr@source_appshost scripts]$

  1. Copy both database tier and application tier nodes from the Source System to the Target System

    Copy the application tier file system from the Source node to the Target node by executing the following steps in the order listed. Ensure the application tier files copied to the Target System are owned by the Target applmgr user, and that the database node files are owned by the Target oracle user. 

    Copy the database node file system

    Log on to the Source System database node as the oracle user, and then: 

  1. Perform a normal shut down of the Source System database. 
  2. Copy the database (.dbf) files from the Source System to the Target System. 
  3. Copy the Source System database ORACLE_HOME to the Target System. 
  4. Start the Source applications system database and application tier processes.
  1. Copy the application tier file from the Source “Run Edition File System” to the Target “Run Edition File System”

    Log on to Run Edition File System in the Source System application tier nodes as the applmgr user. 

    Copy the following application tier directories from the Source Node to the Target Run Edition File System application tier node:

<APPL_TOP> 
<COMMON_TOP>
<OracleAS Tools 10.1.2 ORACLE_HOME>

  1. Configure the Target System Database

Run the following commands to configure the Target System. You will be prompted for specific Target System values such as SID, paths, and ports.

Configure the Target System database server

Log on to the Target System as the oracle user and enter the following commands:

$ cd <RDBMS ORACLE_HOME>/appsutil/clone/bin 
$ perl adcfgclone.pl dbTier

 

[oracle@dbhost ~]$ cd /u01/install/DEV/11.2.0/appsutil/clone/bin
[oracle@dbhost bin]$ perl adcfgclone.pl dbTier

                     Copyright (c) 2011 Oracle Corporation

                        Redwood Shores, California, USA

                        Oracle E-Business Suite Rapid Clone

                                 Version 12.2

                      adcfgclone Version 120.63.12020000.35

Enter the APPS password :

Running:

/u01/install/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -cp /u01/install/DEV/11.2.0/appsutil/clone/jlib/java:
/u01/install/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:
/u01/install/DEV/11.2.0/appsutil/clone/jlib/ojdbc5.jar:
/u01/install/DEV/11.2.0/appsutil/clone/jlib/obfuscatepassword.jar:
/u01/install/DEV/11.2.0/appsutil/clone/jlib/ojmisc.jar:
/u01/install/DEV/11.2.0/appsutil/clone/jlib/java:
/u01/install/DEV/11.2.0/appsutil/clone/jlib/emCfg.jar oracle.apps.ad.context.CloneContext -e /u01/install/DEV/11.2.0/appsutil/clone/bin/../context/db/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_1471.lst -stage /u01/install/DEV/11.2.0/appsutil/clone  2> /tmp/adcfgclone_1471.err; echo $? > /tmp/adcfgclone_1471.res

Log file located at /u01/install/DEV/11.2.0/appsutil/clone/bin/CloneContext_0331162811.log

Provide the values required for creation of the new Database Context file.

Target System Hostname (virtual or normal) [dbhost] : dbhost

Target Instance is RAC (y/n) [n] : n

Target System Database SID : DEV

Target System Base Directory : /u01/install/DEV

Target System utl_file_dir Directory List : /usr/tmp

Number of DATA_TOP’s on the Target System [1] : 1

Target System DATA_TOP Directory 1 [/u01/install/PROD/data] : /u01/install/DEV/data

Target System RDBMS ORACLE_HOME Directory [/u01/install/DEV/11.2.0] : /u01/install/DEV/11.2.0

Do you want to preserve the Display [db:0.0] (y/n)  : n

Target System Display [dbhost:0.0] : dbhost:1.0

Do you want the target system to have the same port values as the source system (y/n) [y] ? : n

Target System Port Pool [0-99] : 2

Checking the port pool 2

done: Port Pool 2 is free

Report file located at /u01/install/DEV/11.2.0/appsutil/temp/portpool.lst

Complete port information available at /u01/install/DEV/11.2.0/appsutil/temp/portpool.lst

Backing up /u01/install/DEV/11.2.0/appsutil/DEV_dbhost.xml to /u01/install/DEV/11.2.0/appsutil/DEV_dbhost.xml.bak

Creating the new Database Context file from :  /u01/install/DEV/11.2.0/appsutil/clone/context/db/adxdbctx.tmp

The new database context file has been created :  /u01/install/DEV/11.2.0/appsutil/DEV_dbhost.xml

Log file located at /u01/install/DEV/11.2.0/appsutil/clone/bin/CloneContext_0331194625.log

Check Clone Context logfile /u01/install/DEV/11.2.0/appsutil/clone/bin/CloneContext_0331194625.log for details.

Running Rapid Clone with command:

Running:

perl /u01/install/DEV/11.2.0/appsutil/clone/bin/adclone.pl java=/u01/install/DEV/11.2.0/appsutil/clone/bin/../jre mode=apply stage=/u01/install/DEV/11.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/install/DEV/11.2.0/appsutil/DEV_dbhost.xml showProgress contextValidated=true

Beginning database tier Apply – Tue Mar 31 19:48:04 2015

/u01/install/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/u01/install/DEV/11.2.0/oui
-classpath /u01/install/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:
/u01/install/DEV/11.2.0/appsutil/clone/jlib/ojdbc6.jar:
/u01/install/DEV/11.2.0/appsutil/clone/jlib/java:
/u01/install/DEV/11.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:
/u01/install/DEV/11.2.0/appsutil/clone/jlib/oui/ewt3.jar:
/u01/install/DEV/11.2.0/appsutil/clone/jlib/oui/share.jar:
/u01/install/DEV/11.2.0/appsutil/clone/jlib/oui/srvm.jar:
/u01/install/DEV/11.2.0/appsutil/clone/jlib/ojmisc.jar
oracle.apps.ad.clone.ApplyDBTier
-e /u01/install/DEV/11.2.0/appsutil/DEV_dbhost.xml
-stage /u01/install/DEV/11.2.0/appsutil/clone   -showProgress

APPS Password : Log file located at /u01/install/DEV/11.2.0/appsutil/log/DEV_dbhost/ApplyDBTier_03311948.log

  |      0% completed       Determining Source system database type (“single” or “rac”).

Source system indentified as being of type “single”!

  |     50% completed      

Completed Apply…

Tue Mar 31 19:54:47 2015

Starting database listener for DEV:

Running:

/u01/install/DEV/11.2.0/appsutil/scripts/DEV_dbhost/addlnctl.sh start DEVLogfile: /u01/install/DEV/11.2.0/appsutil/log/DEV_dbhost/addlnctl.txt

You are running addlnctl.sh version 120.4
Starting listener process DEV …

Listener DEV has already been started.
addlnctl.sh: exiting with status 0

addlnctl.sh: check the logfile /u01/install/DEV/11.2.0/appsutil/log/DEV_dbhost/addlnctl.txt for more information … 

Do you want to change the password for all EBS Schemas? (y/n) [n]) : n

Do you want to change the apps password? (y/n) [n]) : n

Do you want to change the sys and system passwords? (y/n) [n]) : n

[oracle@dbhost bin]$

 

  1. Configure the Target System application tier server nodes (RUN File System)

Log on to the Run Edition File System in the Target System as the applmgr user and enter the following commands:

$ cd <COMMON_TOP>/clone/bin
$ perl adcfgclone.pl appsTier

 

[applmgr@target_appshost apps]$ cd /u01/install/DEV/fs1/EBSapps/comn/clone/bin
[applmgr@target_appshost bin]$ perl adcfgclone.pl appsTier

                     Copyright (c) 2011 Oracle Corporation
                        Redwood Shores, California, USA
                        Oracle E-Business Suite Rapid Clone

                                 Version 12.2

                      adcfgclone Version 120.63.12020000.37

Enter the APPS password :

Running:

/u01/install/DEV/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M
-classpath /u01/install/DEV/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/java:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper -encryptpwd /u01/install/DEV/fs1/EBSapps/comn/clone/bin/../FMW/tempinfoApps.txt

Enter the Weblogic AdminServer password :

Running:

/u01/install/DEV/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M
-classpath /u01/install/DEV/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/java:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper /u01/install/DEV/fs1/EBSapps/comn/clone/bin/../FMW/tempinfo.txt

Running:

/u01/install/DEV/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M
-classpath /u01/install/DEV/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/java:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper /u01/install/DEV/fs1/EBSapps/comn/clone/bin/../FMW/EBSDataSource

Do you want to add a node (yes/no) [no] : no

Running:

/u01/install/DEV/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -cp /u01/install/DEV/fs1/EBSapps/comn/clone/jlib/java:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/xmlparserv2.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/ojdbc6.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/java:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.context.CloneContext -e /u01/install/DEV/fs1/EBSapps/comn/clone/bin/../context/apps/CTXORIG.xml
-validate -pairsfile /tmp/adpairsfile_2838.lst
-stage /u01/install/DEV/fs1/EBSapps/comn/clone  2> /tmp/adcfgclone_2838.err;
echo $? > /tmp/adcfgclone_2838.res

Log file located at /u01/install/DEV/fs1/EBSapps/comn/clone/bin/CloneContext_0401050637.log

Target System File Edition type [run] : run

Provide the values required for creation of the new APPL_TOP Context file.

Target System Hostname (virtual or normal) [target_appshost] : target_appshost

Target System Database SID : DEV

Target System Database Server Node [target_appshost] : dbhost

Target System Database Domain Name [domain] : domain

Target System Base Directory : /u01/install/DEV

Target System Base Directory set to /u01/install/DEV

Target System Current File System Base set to /u01/install/DEV/fs1

Target System Other File System Base set to /u01/install/DEV/fs2

Target System Fusion Middleware Home set to /u01/install/DEV/fs1/FMW_Home

Target System Web Oracle Home set to /u01/install/DEV/fs1/FMW_Home/webtier

Target System Appl TOP set to /u01/install/DEV/fs1/EBSapps/appl

Target System COMMON TOP set to /u01/install/DEV/fs1/EBSapps/comn

Target System Instance Home Directory [/u01/install/DEV] : /u01/install/DEV

Target System Instance Top set to /u01/install/DEV/fs1/inst/apps/DEV_target_appshost

Do you want to preserve the Display [localhost:5.0] (y/n)  : n

Target System Display [target_appshost:0.0] : target_appshost:1.0

Target System Root Service [enabled] : enabled

Target System Web Administration [enabled] : enabled

Target System Web Entry Point Services [enabled] : enabled

Target System Web Application Services [enabled] : enabled

Target System Batch Processing Services [enabled] : enabled

Target System Other Services [disabled] : disabled

Do you want the target system to have the same port values as the source system (y/n) [y] ? : n

Target System Port Pool [0-99] : 2

Checking the port pool 2

done: Port Pool 2 is free

Report file located at /u01/install/DEV/fs1/inst/apps/DEV_target_appshost/admin/out/portpool.lst

Complete port information available at /u01/install/DEV/fs1/inst/apps/DEV_target_appshost/admin/out/portpool.lst

UTL_FILE_DIR on database tier consists of the following directories.

  1. /usr/tmp
  2. /usr/tmp
  3. /u01/install/DEV/11.2.0/appsutil/outbound/DEV_dbhost
  4. /usr/tmp

Choose a value which will be set as APPLPTMP value on the target node [1] : 1
Creating the new APPL_TOP Context file from :  /u01/install/DEV/fs1/EBSapps/comn/clone/context/apps/adxmlctx.tmp
The new APPL_TOP context file has been created :  /u01/install/DEV/fs1/inst/apps/DEV_target_appshost/appl/admin/DEV_target_appshost.xml

Log file located at /u01/install/DEV/fs1/EBSapps/comn/clone/bin/CloneContext_0401051142.log

Check Clone Context logfile /u01/install/DEV/fs1/EBSapps/comn/clone/bin/CloneContext_0401051142.log for details.

Running Rapid Clone with command:

Running:

perl /u01/install/DEV/fs1/EBSapps/comn/clone/bin/adclone.pl java=/u01/install/DEV/fs1/EBSapps/comn/clone/bin/../jre mode=apply stage=/u01/install/DEV/fs1/EBSapps/comn/clone component=appsTier method=CUSTOM appctxtg=/u01/install/DEV/fs1/inst/apps/DEV_target_appshost/appl/admin/DEV_target_appshost.xml showProgress contextValidated=true

FMW Pre-requisite check log file location : /u01/install/DEV/fs1/EBSapps/comn/clone/FMW/logs/prereqcheck.log

Running: /u01/install/DEV/fs1/EBSapps/comn/clone/FMW/t2pjdk/bin/java -classpath /u01/install/DEV/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/engine.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraPrereq.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraPrereqChecks.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraInstaller.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraInstallerNet.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/srvm.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl2.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl-log4j.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/xmlparserv2.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/share.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/java oracle.apps.ad.clone.util.FMWOracleHomePreReqCheck -prereqCheckFMW -e /u01/install/DEV/fs1/inst/apps/DEV_target_appshost/appl/admin/DEV_target_appshost.xml -stage /u01/install/DEV/fs1/EBSapps/comn/clone -log /u01/install/DEV/fs1/EBSapps/comn/clone/FMW/logs/prereqcheck.log

Beginning application tier Apply – Wed Apr  1 05:12:31 2015

/u01/install/DEV/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /u01/install/DEV/fs1/EBSapps/comn/clone/jlib/xmlparserv2.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/ojdbc6.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/java:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/oui/OraInstaller.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/oui/ewt3.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/oui/share.jar:
/u01/install/DEV/fs1/FMW_Home/webtier/../Oracle_EBS-app1/oui/jlib/srvm.jar:/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:
/u01/install/DEV/fs1/FMW_Home/wlserver_10.3/server/lib/weblogic.jar:
/u01/install/DEV/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar  oracle.apps.ad.clone.ApplyAppsTier -e /u01/install/DEV/fs1/inst/apps/DEV_target_appshost/appl/admin/DEV_target_appshost.xml -stage /u01/install/DEV/fs1/EBSapps/comn/clone    -showProgress -nopromptmsg

Log file located at /u01/install/DEV/fs1/inst/apps/DEV_target_appshost/admin/log/clone/ApplyAppsTier_04010512.log

  /    100% completed  

Completed Apply…

Wed Apr  1 05:32:51 2015

 Executing command: /u01/install/DEV/fs1/EBSapps/10.1.2/bin/sqlplus @/u01/install/DEV/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/truncate_ad_nodes_config_status.sql

Do you want to startup the Application Services for DEV? (y/n) [n] : y

Services not started

[applmgr@target_appshost bin]$

When asked the question:
“Do you want to startup the Application Services for mult35? (y/n)” you should answer ‘y’.

  1. Configure the Target System application tier server nodes (PATCH File System)

    1. Source the environment file of the Run Edition File System and run plon the Run Edition File System.

[root@target_appshost ~]# su – applmgr

  E-Business Suite Environment Information

  —————————————-

  RUN File System           : /u01/install/DEV/fs1/EBSapps/appl

  PATCH File System         : /u01/install/DEV/fs2/EBSapps/appl

  Non-Editioned File System : /u01/install/DEV/fs_ne

  DB Host: dbhost.domain  Service/SID: DEV

  E-Business Suite Environment Setting

  ————————————

  – Enter [R/r] for sourcing Run File System Environment file, or
  – Enter [P/p] for sourcing Patch File System Environment file, or
– Enter anything else to exit

  Please choose the environment file you wish to source [R/P]:R

  Sourcing the RUN File System …

[applmgr@target_appshost ~]$ cd $ADMIN_SCRIPTS_HOME

[applmgr@target_appshost scripts]$ perl adpreclone.pl appsTier

                     Copyright (c) 2011, 2014 Oracle Corporation
                        Redwood Shores, California, USA

                        Oracle E-Business Suite Rapid Clone

                                 Version 12.2

                      adpreclone Version 120.31.12020000.16

Enter the APPS User Password:

Enter the Weblogic AdminServer password :

 Checking the status of the Oracle WebLogic Administration Server….

 Running perl /u01/install/DEV/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/adProvisionEBS.pl ebs-get-serverstatus -contextfile=/u01/install/DEV/fs1/inst/apps/DEV_target_appshost/appl/admin/DEV_target_appshost.xml -servername=AdminServer -promptmsg=hide 

The Oracle WebLogic Administration Server is up.

Running:

perl /u01/install/DEV/fs1/EBSapps/appl/ad/12.0.0/bin/adclone.pl java=/u01/install/DEV/fs1/EBSapps/comn/util/jdk64 mode=stage stage=/u01/install/DEV/fs1/EBSapps/comn/clone component=appsTier method= appctx=/u01/install/DEV/fs1/inst/apps/DEV_target_appshost/appl/admin/DEV_target_appshost.xml showProgress

 Setting the wls environment

Beginning application tier Stage – Wed Apr  1 07:38:32 2015

/u01/install/DEV/fs1/EBSapps/comn/util/jdk64/bin/java -Xmx600M -DCONTEXT_VALIDATED=false -Doracle.installer.oui_loc=/oui -classpath /u01/install/DEV/fs1/FMW_Home/webtier/lib/xmlparserv2.jar:
/u01/install/DEV/fs1/FMW_Home/webtier/jdbc/lib/ojdbc6.jar:
/u01/install/DEV/fs1/EBSapps/comn/java/classes:
/u01/install/DEV/fs1/FMW_Home/webtier/oui/jlib/OraInstaller.jar:
/u01/install/DEV/fs1/FMW_Home/webtier/oui/jlib/ewt3.jar:
/u01/install/DEV/fs1/FMW_Home/webtier/oui/jlib/share.jar:
/u01/install/DEV/fs1/FMW_Home/webtier/../Oracle_EBS-app1/oui/jlib/srvm.jar:/u01/install/DEV/fs1/FMW_Home/webtier/jlib/ojmisc.jar:
/u01/install/DEV/fs1/FMW_Home/wlserver_10.3/server/lib/weblogic.jar:
/u01/install/DEV/fs1/FMW_Home/oracle_common/jlib/obfuscatepassword.jar  oracle.apps.ad.clone.StageAppsTier -e /u01/install/DEV/fs1/inst/apps/DEV_target_appshost/appl/admin/DEV_target_appshost.xml -stage /u01/install/DEV/fs1/EBSapps/comn/clone -tmp /tmp -method CUSTOM   -showProgress -nopromptmsg

Log file located at /u01/install/DEV/fs1/inst/apps/DEV_target_appshost/admin/log/clone/StageAppsTier_04010738.log

  –     20% completed    

Completed Stage…

Wed Apr  1 07:45:41 2015

[applmgr@target_appshost scripts]$

Shutdown the Application running on RUN file system

Copy Oracle E-Business Suite application directories from the Run Edition File System to the Patch Edition File System. 

Note: Make sure you pay attention to symbolic links under <OracleAS Tools 10.1.2 ORACLE_HOME> and <COMMON_TOP> directories when copying files.

  1. Log on to the Patch Edition File System in the Target System as the applmgr user and enter the following commands:

$ cd <COMMON_TOP>/clone/bin
$ perl adcfgclone.pl appsTier 

[applmgr@target_appshost bin]$ cd /u01/install/DEV/fs2/EBSapps/comn/clone/bin
[applmgr@target_appshost bin]$ perl adcfgclone.pl appsTier

                     Copyright (c) 2011 Oracle Corporation
                        Redwood Shores, California, USA

                        Oracle E-Business Suite Rapid Clone

                                 Version 12.2

                      adcfgclone Version 120.63.12020000.37

Enter the APPS password :

Running:

/u01/install/DEV/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /u01/install/DEV/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/java:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper -encryptpwd /u01/install/DEV/fs2/EBSapps/comn/clone/bin/../FMW/tempinfoApps.txt

Enter the Weblogic AdminServer password :

Running:

/u01/install/DEV/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /u01/install/DEV/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/java:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper /u01/install/DEV/fs2/EBSapps/comn/clone/bin/../FMW/tempinfo.txt

Running:

/u01/install/DEV/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /u01/install/DEV/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/java:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper /u01/install/DEV/fs2/EBSapps/comn/clone/bin/../FMW/EBSDataSource

Do you want to add a node (yes/no) [no] : no

Running:

/u01/install/DEV/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -cp /u01/install/DEV/fs2/EBSapps/comn/clone/jlib/java:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/xmlparserv2.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/ojdbc6.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/java:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.context.CloneContext -e /u01/install/DEV/fs2/EBSapps/comn/clone/bin/../context/apps/CTXORIG.xml
-validate -pairsfile /tmp/adpairsfile_31120.lst
-stage /u01/install/DEV/fs2/EBSapps/comn/clone  2> /tmp/adcfgclone_31120.err;
echo $? > /tmp/adcfgclone_31120.res

Log file located at /u01/install/DEV/fs2/EBSapps/comn/clone/bin/CloneContext_0401144631.log

Target System File Edition type [run] : patch

Enter the full path of Run File System Context file : /u01/install/DEV/fs1/inst/apps/DEV_target_appshost/appl/admin/DEV_target_appshost.xml

Provide the values required for creation of the new APPL_TOP Context file.

Target System Fusion Middleware Home set to /u01/install/DEV/fs2/FMW_Home

Target System Web Oracle Home set to /u01/install/DEV/fs2/FMW_Home/webtier

Target System Appl TOP set to /u01/install/DEV/fs2/EBSapps/appl

Target System COMMON TOP set to /u01/install/DEV/fs2/EBSapps/comn

Target System Instance Top set to /u01/install/DEV/fs2/inst/apps/DEV_target_appshost

Target System Port Pool [0-99] : 1

Checking the port pool 1
done: Port Pool 1 is free

Report file located at /u01/install/DEV/fs2/inst/apps/DEV_target_appshost/admin/out/portpool.lst
Complete port information available at /u01/install/DEV/fs2/inst/apps/DEV_target_appshost/admin/out/portpool.lst

UTL_FILE_DIR on database tier consists of the following directories.

  1. /usr/tmp
  2. /usr/tmp
  3. /u01/install/DEV/11.2.0/appsutil/outbound/DEV_dbhost
  4. /usr/tmp

Choose a value which will be set as APPLPTMP value on the target node [1] : 1

Creating the new APPL_TOP Context file from :  /u01/install/DEV/fs2/EBSapps/comn/clone/context/apps/adxmlctx.tmp

The new APPL_TOP context file has been created :  /u01/install/DEV/fs2/inst/apps/DEV_target_appshost/appl/admin/DEV_target_appshost.xml

Log file located at /u01/install/DEV/fs2/EBSapps/comn/clone/bin/CloneContext_0401144631.log

Check Clone Context logfile /u01/install/DEV/fs2/EBSapps/comn/clone/bin/CloneContext_0401144631.log for details.

Running Rapid Clone with command:

Running:

perl /u01/install/DEV/fs2/EBSapps/comn/clone/bin/adclone.pl java=/u01/install/DEV/fs2/EBSapps/comn/clone/bin/../jre mode=apply stage=/u01/install/DEV/fs2/EBSapps/comn/clone component=appsTier method=CUSTOM appctxtg=/u01/install/DEV/fs2/inst/apps/DEV_target_appshost/appl/admin/DEV_target_appshost.xml showProgress contextValidated=true

FMW Pre-requisite check log file location : /u01/install/DEV/fs2/EBSapps/comn/clone/FMW/logs/prereqcheck.log

Running: /u01/install/DEV/fs2/EBSapps/comn/clone/FMW/t2pjdk/bin/java -classpath /u01/install/DEV/fs2/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/engine.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraPrereq.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraPrereqChecks.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraInstaller.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraInstallerNet.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/srvm.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl2.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl-log4j.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/xmlparserv2.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/share.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/java oracle.apps.ad.clone.util.FMWOracleHomePreReqCheck -prereqCheckFMW -e /u01/install/DEV/fs2/inst/apps/DEV_target_appshost/appl/admin/DEV_target_appshost.xml
-stage /u01/install/DEV/fs2/EBSapps/comn/clone -log /u01/install/DEV/fs2/EBSapps/comn/clone/FMW/logs/prereqcheck.log

Beginning application tier Apply – Wed Apr  1 14:48:10 2015

/u01/install/DEV/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /u01/install/DEV/fs2/EBSapps/comn/clone/jlib/xmlparserv2.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/ojdbc6.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/java:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/oui/OraInstaller.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/oui/ewt3.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/oui/share.jar:
/u01/install/DEV/fs2/FMW_Home/webtier/../Oracle_EBS-app1/oui/jlib/srvm.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:
/u01/install/DEV/fs2/FMW_Home/wlserver_10.3/server/lib/weblogic.jar:
/u01/install/DEV/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar  oracle.apps.ad.clone.ApplyAppsTier -e /u01/install/DEV/fs2/inst/apps/DEV_target_appshost/appl/admin/DEV_target_appshost.xml -stage /u01/install/DEV/fs2/EBSapps/comn/clone    -showProgress -nopromptmsg

Log file located at /u01/install/DEV/fs2/inst/apps/DEV_target_appshost/admin/log/clone/ApplyAppsTier_04011448.log

  \    100% completed     

Completed Apply…

Wed Apr  1 15:06:46 2015

Looking for incomplete CLONE record in ad_adop_session_patches table

The CLONE record status is no rows selected

[applmgr@target_appshost bin]$

  1. Reset Password

  2. SYSADMIN Password

[applmgr@target_appshost ~]$ AFPASSWD -f SYSADMIN

Enter the ORACLE password of Application Object Library ‘APPSUSER’:

Connected successfully to APPS.

Log file: AFPWD_DEV_868117.log

Enter new password for user [SYSADMIN]:

Verify new password for user [SYSADMIN]:

[applmgr@target_appshost ~]$ cat AFPWD_DEV_868117.log

+—————————————————————————-+

Application Object Library – AFPASSWD

+—————————————————————————-+

Copyright (c) 1998, 2014, Oracle and/or its affiliates. All rights reserved.

+—————————————————————————-+

Current system time is 01-APR-15 12:01:56 

+—————————————————————————-+

Working…

Password is changed successfully for user SYSADMIN.

AFPASSWD completed successfully.

+—————————————————————————-+

Current system time is 01-APR-15 12:02:24 

+—————————————————————————-+

[applmgr@target_appshost ~]$

  1. APPS Password

    Source Run Filesystem and execute AFPASSSWD

[root@target_appshost ~]# su – applmgr

  E-Business Suite Environment Information

  —————————————-

  RUN File System           : /u01/install/DEV/fs1/EBSapps/appl

  PATCH File System         : /u01/install/DEV/fs2/EBSapps/appl

  Non-Editioned File System : /u01/install/DEV/fs_ne

  DB Host: dbhost.domain  Service/SID: DEV

  E-Business Suite Environment Setting

  ————————————

  – Enter [R/r] for sourcing Run File System Environment file, or

  – Enter [P/p] for sourcing Patch File System Environment file, or

  – Enter anything else to exit

  Please choose the environment file you wish to source [R/P]:R

  Sourcing the RUN File System …

[applmgr@target_appshost ~]$ AFPASSWD -c APPS -s APPLSYS

Enter the ORACLE password of Application Object Library ‘APPSUSER’:

Connected successfully to APPS.

Enter the password for your ‘SYSTEM’ ORACLE schema:

Connected successfully to SYSTEM.

Log file: AFPWD_DEV_158811.log

Enter new password for user:       <Enter new APPS password>

Verify new password for user:     <Re-Enter new APPS password>

AFPASSWD completed successfully.

[applmgr@target_appshost ~]$ sqlplus apps/****

SQL*Plus: Release 10.1.0.5.0 – Production on Sat Apr 4 14:47:09 2015

Copyright (c) 1982, 2005, Oracle.  All rights reserved.

Connected to:

Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 – 64bit Production

With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL> show user

USER is “APPS”

SQL> exit

Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 – 64bit Production

With the Partitioning, OLAP, Data Mining and Real Application Testing options

[applmgr@target_appshost ~]$ cat AFPWD_DEV_158811.log

+—————————————————————————-+

Application Object Library – AFPASSWD

+—————————————————————————-+

Copyright (c) 1998, 2014, Oracle and/or its affiliates. All rights reserved.

+—————————————————————————-+

Current system time is 04-APR-15 14:46:50 

+—————————————————————————-+

Working…

AFPASSWD completed successfully.

+—————————————————————————-+

Current system time is 04-APR-15 14:47:02 

+—————————————————————————-+

[applmgr@target_appshost ~]$

  1. Run autoconfig with the newly changed password.

    [applmgr@target_appshost ~]$ adautocfg.sh -appspass=devapps

    iii. Start AdminServer
    [applmgr@target_appshost ~]$ $INST_TOP/admin/scripts/adadminsrvctl.sh start

  2. Change the “apps” password in WLS Datasource as follows
  3. Log in to WLS Administration Console.
  4. Click Lock & Edit in Change Center.
  5. In the Domain Structure tree, expand Services, then select Data Sources.
  6. On the “Summary of JDBC Data Sources” page, select EBSDataSource.
  7. On the “Settings for EBSDataSource” page, select the Connection Pool tab.
  8. Enter the new password in the “Password” field.
  9. Enter the new password in the “Confirm Password” field.
  10. Click Save.
  11. Click Activate Changes in Change Center.

 

  1. Update Below Profiles at Site Level

Profile Option Name Value
Java Color Scheme Red
Site Name :::::::::::: [ DEV ]  – Cloned from CRP1 on 01-April-2015 ::::::::::::
Signon Password Length 6
Signon Password Hard To Guess Yes
Signon Password No Reuse 180
Sign-On:Notification Yes
ICX:Session Timeout 30

 Check the Login and release the environment 🙂

Oracle EBS 12.2.4 Installation using VM Template from eDelivery


Installing Oracle™ E-Business Suite 12.2.4 from Oracle VM Template on ODA X4-2

  • Install Oracle VM Server
    • Install Oracle VM Manager
    • Download the EBS 12.2.4 templates
    • Import the relevant template in to VM Server– using VM Manager
    • Create a Virtual Machine from the Template
    • Start the newly created VM which is an EBS machine.
    • Confirm OS Pre-Req
    • Configure the network through the prepared scripts
    • Configure the EBS’s Database Tier through the prepared scripts
    • Configure the EBS’s Application Tier through the prepared scripts
  1. Download the EBS 12.2.4 templates

    The Oracle E-Business Suite Release 12.2.4 VM Virtual Appliances are delivered in a single media pack, “Oracle VM Virtual Appliances for Oracle E-Business Suite Release 12.2.4 Media Pack for x86 (64-bit)”. This media pack contains a series of downloadable components or packages, and each package contains one or more zip files.
    For the Production database install, you will need the following six component packages:

  • V56218-01 Oracle E-Business Suite Release 12.2.4 Production Database Tier Install X86 (64 bit) (Part 1 of 2) Linux x86-64
    • V56218-01 Oracle E-Business Suite Release 12.2.4 Production Database Tier Install X86 (64 bit) (Part 2 of 2) Linux x86-64
    • V56219-01 Oracle E-Business Suite Release 12.2.4 Production Database Tier Install X86 (64 bit) (Part 1 of 2) Linux x86-64
    • V56219-01 Oracle E-Business Suite Release 12.2.4 Production Database Tier Install X86 (64 bit) (Part 2 of 2) Linux x86-64
    • V56220-01 Oracle E-Business Suite Release 12.2.4 Production Database Tier Install X86 (64 bit) (Part 1 of 2) Linux x86-64
    • V56220-01 Oracle E-Business Suite Release 12.2.4 Production Database Tier Install X86 (64 bit) (Part 2 of 2) Linux x86-64

For the application tier install, you will need the following ten component packages:
• V59635-01 Oracle E-Business Suite Release 12.2.4 Application Tier Install X86 (64 bit) (Part 1 of 2) Linux x86-64
• V59635-01 Oracle E-Business Suite Release 12.2.4 Application Tier Install X86 (64 bit) (Part 2 of 2) Linux x86-64
• V59636-01 Oracle E-Business Suite Release 12.2.4 Application Tier Install X86 (64 bit) (Part 1 of 2) Linux x86-64
• V59636-01 Oracle E-Business Suite Release 12.2.4 Application Tier Install X86 (64 bit) (Part 2 of 2) Linux x86-64
• V59637-01 Oracle E-Business Suite Release 12.2.4 Application Tier Install X86 (64 bit) (Part 1 of 2) Linux x86-64
• V59637-01 Oracle E-Business Suite Release 12.2.4 Application Tier Install X86 (64 bit) (Part 2 of 2) Linux x86-64
• V59638-01 Oracle E-Business Suite Release 12.2.4 Application Tier Install X86 (64 bit) (Part 1 of 2) Linux x86-64
• V59638-01 Oracle E-Business Suite Release 12.2.4 Application Tier Install X86 (64 bit) (Part 2 of 2) Linux x86-64
• V59639-01 Oracle E-Business Suite Release 12.2.4 Application Tier Install X86 (64 bit) (Part 1 of 2) Linux x86-64
• V59639-01 Oracle E-Business Suite Release 12.2.4 Application Tier Install X86 (64 bit) (Part 2 of 2) Linux x86-64
For the sparse application tier install, you will need the following component package:
• V55217-01 Oracle E-Business Suite Release 12.2.4 Sparse Tier/OS Install X86 (64 bit) Linux x86-64
To download the VM Virtual Appliances for Oracle E-Business Suite Release 12.2.4:
1. On the Oracle Software Delivery Cloud (https://edelivery.oracle.com/) page, use the “Cloud Portal (Main)” drop-down menu to select “Oracle Linux/VM”.
2. Click the Sign In/Register button.
3. Read and accept the Terms and Restrictions and click the Continue button.
4. On the Media Pack Search page, select the following values:
o Select a Product Pack: Oracle VM Templates
o Platform: x86 64 bit
5. Select the “Oracle VM Virtual Appliances for Oracle E-Business Suite 12.2.4 for x86 (64-bit)” media pack from the search result table, and click the Continue button.
The packages listed above, corresponding to the 5 available Oracle E-Business Suite 12.2.4 appliances, appear.
6. Download the desired packages and thus the zip files which contain the associated appliances.
For example, download the eight component packages for “Oracle E-Business Suite Release 12.2.4 Vision Demo Database Tier Install X86 (64 bit)”.

  1. Confirm OS Pre-Req

    If not using the pre-install rpm, the following packages (or versions of packages) which are not part of the OS distribution media must be downloaded separately (from http://oss.oracle.com/projects/compat-oracle/files/Enterprise_Linux/) for both Oracle Linux 6 and RHEL 6 and installed manually on the application tier:
    • openmotif21-2.1.30-11.EL6.i686 (32-bit)1
    • xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386 (32-bit)
    Additionally, the following rpm needs to be installed from the Oracle Linux 6 or RHEL 6 distribution media on the application tier:
    • libXrender-0.9.5-1.el6.i686
    If not using the pre-install rpm, the following packages must be installed from the Oracle Linux 6 or RHEL 6 distribution media on both the application and database tiers:
    • binutils-2.20.51.0.2-5.20.el6.x86_64
    • compat-libstdc++-296-2.96-144.el6.i686
    • compat-libstdc++-33-3.2.3-69.el6.i686
    • gcc-4.4.5-6.el6.x86_64
    • gcc-c++-4.4.5-6.el6.x86_64
    • glibc-2.12-1.7.el6.i686 (32-bit)
    • glibc-2.12-1.7.el6.x86_64
    • glibc-common-2.12-1.7.el6.x86_64
    • glibc-devel-2.12-1.7.el6.i686 (32-bit)
    • glibc-devel-2.12-1.7.el6.x86_64
    • libgcc-4.4.4-13.el6.i686
    • libgcc-4.4.4-13.el6.x86_64
    • libstdc++-devel-4.4.4-13.el6.i686
    • libstdc++-devel-4.4.4-13.el6.x86_64
    • libstdc++-4.4.4-13.el6.i686
    • libstdc++-4.4.4-13.el6.x86_64
    • libXi-1.3-3.el6.i686
    • libXp-1.0.0-15.1.el6.i686
    • libXp-1.0.0-15.1.el6.x86_64
    • libaio-0.3.107-10.el6.i686
    • libaio-0.3.107-10.el6.x86_64
    • libgomp-4.4.4-13.el6.x86_64
    • make-3.81-19.el6.x86_64
    • gdbm-1.8.0-36.el6.i686
    • gdbm-1.8.0-36.el6.x86_64
    • redhat-lsb-4.0-3.0.1.el6.x86_64
    • sysstat-9.0.4-11.el6.x86_64
    • util-linux-ng-2.17.2-6.el6.x86_64
    Additionally, the following RPMs are required for the database tier (running Oracle Database 11gR2):
    • compat-libcap1-1.10-1.x86_64
    • compat-libstdc++-33-3.2.3-69.el6.x86_64
    • elfutils-libelf-devel-0.148.1-el6.x86_64
    • libaio-devel-0.3.107-10.el6.i686
    • libaio-devel-0.3.107-10.el6.x86_64
    • unixODBC-2.2.14-11.el6.i686
    • unixODBC-devel-2.2.14-11.el6.i686
    • xorg-x11-utils-7.4-8.el6.x86_64
    Alternatively on the database tier, users can install the following pre-install rpm (available via ULN on http://linux.oracle.com or the Oracle Public yum repository on http://public-yum.oracle.com) :
    • oracle-rdbms-server-11gR2-preinstall.x86_64
    The E-Business Suite Pre-Install RPM includes all the above required rpms and dependencies for running the application and database tiers – see the ‘E-Business Suite Pre-Install RPM’ section below for more details.
    Note:
    The openmotif package version must be 2.1.30 (for example, openmotif-2.3.3-1 is not supported).
    Swap Space
    It is recommended that the swap space on the system be 16 GB or more. To determine the size of the configured swap space, enter the following command:
    # grep SwapTotal /proc/meminfo

Kernel Settings
Edit the /etc/sysctl.conf file to configure your kernel settings to the minimum values shown below. After editing the file, use the “sysctl -p” command or restart the system to invoke the new settings.
Note: If the current value for any parameter is higher than the value listed in the following table, then do not change the value of that parameter.
The following table lists the kernel settings for Oracle Linux 5 and 6, Red Hat Enterprise Linux 5 and 6, and SUSE Linux Enterprise Server 10 and 11:
Parameter Value
kernel.semmsl 2561
kernel.semmns 320001
kernel.semopm 1001
kernel.semmni 1421
kernel.shmall 20971524
kernel.shmmax Half the size of the physical memory (in bytes), and at least 42949672952
kernel.shmmni 4096
kernel.msgmax 8192
kernel.msgmnb 65535
kernel.msgmni 2878
fs.file-max 6815744
fs.aio-max-nr 1048576
net.ipv4.ip_local_port_range 9000 655003
net.ipv4.tcp_tw_recycle 05
net.core.rmem_default 262144
net.core.rmem_max 4194304
net.core.wmem_default 262144
net.core.wmem_max 1048576
set using the following entry in the /etc/sysctl.conf file
kernel.sem = 256 32000 100 142

Domain Name System (DNS) Resolver Parameters
Two Domain Name System (DNS) resolver parameters (timeout and attempts) are set by default to low values when the operating system is installed. These low values may cause network connections to an Oracle database to fail. If this happens, add or update the following entries to these minimum settings in the /etc/resolv.conf file on each server node:
options attempts:5
options timeout:15

For Oracle Linux 5 and 6, and Red Hat Enterprise Linux 5 and 6:
1. Verify that the /etc/hosts file is formatted as follows:
127.0.0.1 localhost.localdomain localhost
[ip_address] [node_name].[domain_name] [node_name]
2. Verify that the /etc/sysconfig/network file is formatted as follows:
HOSTNAME=[node_name].[domain_name]

or as follows:
HOSTNAME=[node_name]
NISDOMAIN=[domain_name]

  1. If the /etc/sysconfig/networking/profiles/default/network file exists, remove it.
    4. If you changed any files in the previous steps, restart the system.
    Modifying the Number of Open File Descriptors
    Open the /etc/security/limits.conf file and change the existing values for “hard” and “soft” parameters as follows. Restart the system after making changes.
    Note: If the current value for any parameter is higher than the value listed below, do not change the value of that parameter as the following are suggested minimum values.
    * hard nofile 65536
    * soft nofile 4096
    * hard nproc 16384
    * soft nproc 2047
    * hard stack 16384

Link to Motif library in Oracle Application Server 10.1.2 (on Oracle Linux 5, 6 and RHEL 5, 6 only)
Perform the following command (as root on your system) to update a required link to a Motif library prior to relinking or patching the 10.1.2 Application Server Oracle Home:
# unlink /usr/lib/libXtst.so.6
# ln -s /usr/X11R6/lib/libXtst.so.6.1 /usr/lib/libXtst.so.6

  1. Configure EBS Database Tier

Run script visiondbconfig.sh from /u01/install/VISION/scripts
Add your SID or Database Name (i.e.: VIS)

[root@dbhost scripts]# sh proddbconfig.sh

Pinging the Host dbhost.domain.com…
The Host dbhost.domain.com is responding
proceeding with the configuration…

==================================================
Prepare the Pairs File for Database Tier Clone…
===================================================

===========================================
ORACLE_SID is not set in the Pairs File
Enter the Oracle Database SID :CRP1

==========================================================
Starting DB Tier configuration
==========================================================
Parameters Used for this Configuration…
The Pairs File :/u01/install/PROD/scripts/inst_db_pairs.txt
The Source context file used :/u01/install/PROD/11.2.0/appsutil/clone/context/db/CTXORIG.xml
The Target context file :/u01/install/PROD/11.2.0/appsutil/CRP1_dbhost.xml
==========================================================
The Configuration Used to Create this VM…
The Oracle E-Business Suite DBSID : CRP1
The Oracle E-Business Suite DB HostName : <Enter Database Host Server Name>
The Oracle E-Business Suite DB Domain Name :<Enter Server Domain>
The Oracle E-Business Suite DB TNS Port :1521
==========================================================
/u01/install/PROD/11.2.0/oui/bin/detachHome.sh: line 5: cd: /u01/install/VISION/db/tech_st/11.2.0/oui/bin: No such file or directory
/u01/install/PROD/11.2.0/oui/bin/detachHome.sh: line 6: ./runInstaller: No such file or directory

==========================================================
Cloning the DB Tier Context File
==========================================================

Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA

Oracle E-Business Suite Rapid Clone

Version 12.2

adclonectx Version 120.30.12020000.8

Running:
/u01/install/PROD/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -classpath /u01/install/PROD/11.2.0/appsutil/clone/bin/../jlib/ojdbc5.jar:/u01/install/PROD/11.2.0/appsutil/clone/bin/../jlib/xmlparserv2.jar:/u01/install/PROD/11.2.0/appsutil/clone/bin/../jlib/java oracle.apps.ad.context.CloneContext -e /u01/install/PROD/11.2.0/appsutil/clone/context/db/CTXORIG.xml -pairsfile /u01/install/PROD/scripts/inst_db_pairs.txt -out /u01/install/PROD/11.2.0/appsutil/CRP1_dbhost.xml -noprompt

Log file located at /u01/install/PROD/11.2.0/appsutil/log/CloneContext_0319065452.log
Report file located at /u01/install/PROD/11.2.0/appsutil/temp/portpool.lst
Complete port information available at /u01/install/PROD/11.2.0/appsutil/temp/portpool.lst

Creating the new Database Context file from :
/u01/install/PROD/11.2.0/appsutil/clone/context/db/adxdbctx.tmp

The new database context file has been created :
/u01/install/PROD/11.2.0/appsutil/CRP1_dbhost.xml

Log file located at /u01/install/PROD/11.2.0/appsutil/log/CloneContext_0319065452.log
contextfile=/u01/install/PROD/11.2.0/appsutil/CRP1_dbhost.xml
Check Clone Context logfile /u01/install/PROD/11.2.0/appsutil/log/CloneContext_0319065452.log for details.

Executing adcfgclone.pl on the Database Tier
Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA

Oracle E-Business Suite Rapid Clone

Version 12.2

adcfgclone Version 120.63.12020000.35
stty: standard input: Inappropriate ioctl for device

Enter the APPS password :
stty: standard input: Inappropriate ioctl for device

Running Rapid Clone with command:
Running:
perl /u01/install/PROD/11.2.0/appsutil/clone/bin/adclone.pl java=/u01/install/PROD/11.2.0/appsutil/clone/bin/../jre mode=apply stage=/u01/install/PROD/11.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/install/PROD/11.2.0/appsutil/CRP1_dbhost.xml showProgress contextValidated=false

Beginning database tier Apply – Thu Mar 19 06:54:54 2015

/u01/install/PROD/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=false -Doracle.installer.oui_loc=/u01/install/PROD/11.2.0/oui -classpath /u01/install/PROD/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/install/PROD/11.2.0/appsutil/clone/jlib/ojdbc6.jar:/u01/install/PROD/11.2.0/appsutil/clone/jlib/java:/u01/install/PROD/11.2.0
/appsutil/clone/jlib/oui/OraInstaller.jar:/u01/install/PROD/11.2.0/appsutil/clone/jlib/oui/ewt3.jar:/u01/install/PROD/11.2.0/appsutil/clone/jlib/oui/share.jar:/u01/install/PROD/11.2.0/appsutil/

clone/jlib/oui/srvm.jar:/u01/install/PROD/11.2.0/appsutil/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyDBTier -e /u01/install/PROD/11.2.0/appsutil/CRP1_dbhost.xml -stage /u01/install/PROD/11.2.0/appsutil/clone -showProgress
APPS Password : Log file located at /u01/install/PROD/11.2.0/appsutil/log/CRP1_dbhost/ApplyDBTier_03190654.log
| 0% completed
Log file located at /u01/install/PROD/11.2.0/appsutil/log/CRP1_dbhost/ApplyDBTier_03190654.log
Determining Source system database type (“single” or “rac”).
Source system indentified as being of type “single”!
\ 15% completed

Completed Apply…
Thu Mar 19 07:02:52 2015

Starting database listener for CRP1:
Running:
/u01/install/PROD/11.2.0/appsutil/scripts/CRP1_dbhost/addlnctl.sh start CRP1
Logfile: /u01/install/PROD/11.2.0/appsutil/log/CRP1_dbhost/addlnctl.txt

You are running addlnctl.sh version 120.4

Starting listener process CRP1 …

Listener CRP1 has already been started.

addlnctl.sh: exiting with status 0

addlnctl.sh: check the logfile /u01/install/PROD/11.2.0/appsutil/log/CRP1_dbhost/addlnctl.txt for more information …

Do you want to change the password for all EBS Schemas? (y/n) [n]) :
Do you want to change the apps password? (y/n) [n]) :
Do you want to change the sys and system passwords? (y/n) [n]) :

Cloning the DB Tier Completed SuccessfullyLogfile: /u01/install/PROD/11.2.0/appsutil/log/CRP1_dbhost/addlnctl.txt

You are running addlnctl.sh version 120.4

Shutting down listener process CRP1 …

LSNRCTL for Linux: Version 11.2.0.4.0 – Production on 19-MAR-2015 07:02:53

Copyright (c) 1991, 2013, Oracle. All rights reserved.

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dbhost.domain.com)(PORT=1521)))
The command completed successfully

addlnctl.sh: exiting with status 0

addlnctl.sh: check the logfile /u01/install/PROD/11.2.0/appsutil/log/CRP1_dbhost/addlnctl.txt for more information …

You are running addbctl.sh version 120.1

Shutting down database CRP1 …

SQL*Plus: Release 11.2.0.4.0 Production on Thu Mar 19 07:02:53 2015

Copyright (c) 1982, 2013, Oracle. All rights reserved.

Connected.
Database closed.
Database dismounted.
ORACLE instance shut down.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 – 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

addbctl.sh: exiting with status 0

========================================================== Enabling the DB Service Startup on Boot ==========================================================

==========================================================
Starting the Oracle E-Business Suite DB Tier Services
==========================================================
Logfile: /u01/install/PROD/11.2.0/appsutil/log/CRP1_dbhost/addlnctl.txt

You are running addlnctl.sh version 120.4

Starting listener process CRP1 …

LSNRCTL for Linux: Version 11.2.0.4.0 – Production on 19-MAR-2015 07:03:32

Copyright (c) 1991, 2013, Oracle. All rights reserved.

Starting /u01/install/PROD/11.2.0/bin/tnslsnr: please wait…

TNSLSNR for Linux: Version 11.2.0.4.0 – Production
System parameter file is /u01/install/PROD/11.2.0/network/admin/CRP1_dbhost/listener.ora
Log messages written to /u01/install/PROD/11.2.0/admin/CRP1_dbhost/diag/tnslsnr/dbhost/crp1/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dbhost.domain.com)(PORT=1521)))

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dbhost.domain.com)(PORT=1521)))
STATUS of the LISTENER
————————
Alias CRP1
Version TNSLSNR for Linux: Version 11.2.0.4.0 – Production
Start Date 19-MAR-2015 07:03:32
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/install/PROD/11.2.0/network/admin/CRP1_dbhost/listener.ora
Listener Log File /u01/install/PROD/11.2.0/admin/CRP1_dbhost/diag/tnslsnr/dbhost/crp1/alert/log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dbhost.domain.com)(PORT=1521)))
Services Summary…
Service “CRP1” has 1 instance(s).
Instance “CRP1”, status UNKNOWN, has 1 handler(s) for this service…
The command completed successfully

addlnctl.sh: exiting with status 0

addlnctl.sh: check the logfile /u01/install/PROD/11.2.0/appsutil/log/CRP1_dbhost/addlnctl.txt for more information …

You are running addbctl.sh version 120.1

Starting the database CRP1 …

SQL*Plus: Release 11.2.0.4.0 Production on Thu Mar 19 07:03:32 2015

Copyright (c) 1982, 2013, Oracle. All rights reserved.

Connected to an idle instance.
ORACLE instance started.

Total System Global Area 2137886720 bytes
Fixed Size 2254952 bytes
Variable Size 486541208 bytes
Database Buffers 1627389952 bytes
Redo Buffers 21700608 bytes
Database mounted.
Database opened.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 – 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

addbctl.sh: exiting with status 0

=====================INSTALLATION SUMMARY============

The Oracle E-Business Suite DB HostName : dbhost.domain.com
The Base Installation Directory : /u01/install/PROD
The Oracle Home Location : /u01/install/PROD/11.2.0
The Oracle E-Business Suite Data File Dir: /u01/install/PROD/data
The Oracle E-Business Suite DBSID : CRP1
The Oracle E-Business Suite DB TNS Port : 1521
==========================================================
[root@dbhost scripts]#

 

  1. Configure EBS Application Tier

    Run script appsconfig.sh from /u01/install/APPS/scripts

[root@appshost scripts]# pwd
/u01/install/APPS/scripts
[root@appshost scripts]# ls
appscleanup.sh appsconfig.sh appspairs.txt apps.rc inst_apps_pairs.txt startapps.sh stopapps.sh
[root@appshost scripts]# hostname
appshost.domain.com
[root@appshost scripts]# sh appsconfig.sh
===================ATTENTION====================================
Successful Configuration of this Virtual Machine requires
connectivity to the E-Business Suite Database Tier
Please Ensure that this host can connect to the DB Tier before
proceeding with the configuration. The sqlnet.ora file on the
Database Tier need to contain the hostname you are going
to use for this Virtual Machine.
============================================================
Press any key to continue…

=======================================
Configuring Oracle E-Business Suite…

==================================================
Prepare the Pairs File for Application Tier Clone…
===================================================

Pinging the Host appshost.domain.com…
The Host appshost.domain.com is responding
proceeding with the configuration…

==================================================
Checking if the FQDN is > 30 chars…
===================================================

The FQDN is less than 30 characters. Proceeding with the configuration
Database Tier Information is not set in the Pairs File
Prompting the user for Database Tier Information

Enter the IP Address of the DB Tier Host:**.**.**.**

Enter the Database Tier Host Name (without the domain) :dbhost

Enter the Database Tier Domain Name :domain.com

Enter the Oracle Database SID :CRP1

Enter the TNS Listener Port Number :1521

Updating /etc/hosts file with DB Tier Information

==========================================================
Starting Apps Tier configuration
==========================================================
Parameters Used for this Configuration…
The Pairs File :/u01/install/APPS/scripts/inst_apps_pairs.txt
The Source context file used :/u01/install/APPS/fs1/EBSapps/comn/clone/context/apps/CTXORIG.xml
The Target context file :/u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml

==========================================================
Checking for the DB Host and Database
==========================================================

Pinging the Database Host dbhost.domain.com…

The Database Host dbhost.domain.com seem to be up
Proceeding with rest of the configuration…

Connected to Database CRP1 on dbhost…

==========================================================
Configuring the VM as a new Application Tier Node
==========================================================

==========================================================
Configuring the Application Tier File System (fs1)
==========================================================

==========================================================
Cloning the Application Tier Context File
==========================================================

Executing the command su applmgr -c echo apps|./adclonectx.pl contextfile=/u01/install/APPS/fs1/EBSapps/comn/clone/context/apps/CTXORIG.xml pairsfile=/u01/install/APPS/scripts/inst_apps_pairs.txt outfile=/u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml nopromptmsg
Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA

Oracle E-Business Suite Rapid Clone

Version 12.2

adclonectx Version 120.30.12020000.10

Running:
/u01/install/APPS/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /u01/install/APPS/fs1/EBSapps/comn/clone/bin/../jlib/ojdbc6.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/bin/../jlib/xmlparserv2.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/bin/../jlib/java oracle.apps.ad.context.CloneContext -e /u01/install/APPS/fs1/EBSapps/comn/clone/context/apps/CTXORIG.xml -pairsfile /u01/install/APPS/scripts/inst_apps_pairs.txt -out /u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml -noprompt

Log file located at /u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/log/CloneContext_0319064602.log

Target System Base Directory set to /u01/install/APPS

Target System Current File System Base set to /u01/install/APPS/fs1

Target System Other File System Base set to /u01/install/APPS/fs2

Target System Fusion Middleware Home set to /u01/install/APPS/fs1/FMW_Home

Target System Web Oracle Home set to /u01/install/APPS/fs1/FMW_Home/webtier

Target System Appl TOP set to /u01/install/APPS/fs1/EBSapps/appl

Target System COMMON TOP set to /u01/install/APPS/fs1/EBSapps/comn

Target System Instance Top set to /u01/install/APPS/fs1/inst/apps/CRP1_appshost
Report file located at /u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/out/portpool.lst
Complete port information available at /u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/out/portpool.lst

Creating the new APPL_TOP Context file from :
/u01/install/APPS/fs1/EBSapps/comn/clone/context/apps/adxmlctx.tmp

The new APPL_TOP context file has been created :
/u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml

Log file located at /u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/log/CloneContext_0319064602.log
contextfile=/u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml
Check Clone Context logfile /u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/log/CloneContext_0319064602.log for details.

Executing the command perl adcfgclone.pl appsTier /u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml
Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA

Oracle E-Business Suite Rapid Clone

Version 12.2

adcfgclone Version 120.63.12020000.37
stty: standard input: Inappropriate ioctl for device

Enter the APPS password :
stty: standard input: Inappropriate ioctl for device
Running:
/u01/install/APPS/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /u01/install/APPS/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/java:
/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper -encryptpwd /u01/install/APPS/fs1/EBSapps/comn/clone/bin/../FMW/tempinfoApps.txt

stty: standard input: Inappropriate ioctl for device

Enter the Weblogic AdminServer password :
stty: standard input: Inappropriate ioctl for device
Running:
/u01/install/APPS/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /u01/install/APPS/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/java:
/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper /u01/install/APPS/fs1/EBSapps/comn/clone/bin/../FMW/tempinfo.txt
Running:
/u01/install/APPS/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /u01/install/APPS/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/java:
/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper /u01/install/APPS/fs1/EBSapps/comn/clone/bin/../FMW/EBSDataSource

Running Rapid Clone with command:
Running:
perl /u01/install/APPS/fs1/EBSapps/comn/clone/bin/adclone.pl java=/u01/install/APPS/fs1/EBSapps/comn/clone/bin/../jre mode=apply
stage=/u01/install/APPS/fs1/EBSapps/comn/clone component=appsTier method=CUSTOM appctxtg=/u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml showProgress contextValidated=false

FMW Pre-requisite check log file location : /u01/install/APPS/fs1/EBSapps/comn/clone/FMW/logs/prereqcheck.log

Running: /u01/install/APPS/fs1/EBSapps/comn/clone/FMW/t2pjdk/bin/java -classpath /u01/install/APPS/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/engine.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraPrereq.jar:
/u01/install/APPS/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraPrereqChecks.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraInstaller.jar:
/u01/install/APPS/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraInstallerNet.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/srvm.jar:
/u01/install/APPS/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl2.jar:
/u01/install/APPS/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl-log4j.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/xmlparserv2.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/share.jar:
/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/java oracle.apps.ad.clone.util.FMWOracleHomePreReqCheck -prereqCheckFMW -e /u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml -stage /u01/install/APPS/fs1/EBSapps/comn/clone -log /u01/install/APPS/fs1/EBSapps/comn/clone/FMW/logs/prereqcheck.log

Beginning application tier Apply – Thu Mar 19 06:46:11 2015

/u01/install/APPS/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=false -Doracle.installer.oui_loc=/oui -classpath /u01/install/APPS/fs1/EBSapps/comn/clone/jlib/xmlparserv2.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/ojdbc6.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/java:
/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/oui/OraInstaller.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/oui/ewt3.jar:/u01/install/APPS/fs1/EBSapps/comn/
clone/jlib/oui/share.jar:/u01/install/APPS/fs1/FMW_Home/webtier/../Oracle_EBS-app1/oui/jlib/srvm.jar:/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:/u01/install/APPS/fs1/FMW_Home/wlserver_10.3/server/lib/weblogic.jar:
/u01/install/APPS/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar oracle.apps.ad.clone.ApplyAppsTier -e /u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml -stage /u01/install/APPS/fs1/EBSapps/comn/clone -showProgress -nopromptmsg
Log file located at /u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/log/clone/ApplyAppsTier_03190646.log
| 0% completed
Log file located at /u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/log/clone/ApplyAppsTier_03190646.log
/ 100% completed

Completed Apply…
Thu Mar 19 07:05:06 2015

Executing command: /u01/install/APPS/fs1/EBSapps/10.1.2/bin/sqlplus @/u01/install/APPS/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/truncate_ad_nodes_config_status.sql

Do you want to startup the Application Services for CRP1? (y/n) [n] :
Services not started

==========================================================
Configuring the Application Tier File System (fs2) appsconfig.sh: line 373: print: command not found

Copying the Application Tier File System from fs1 to fs2

/u01/install/APPS/fs2/FMW_Home exists. Proceeding to detach and remove the Home
Starting Oracle Universal Installer…

Checking swap space: must be greater than 500 MB. Actual 10239 MB Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /u01/install/oraInventory
‘DetachHome’ was successful.
Starting Oracle Universal Installer…

Checking swap space: must be greater than 500 MB. Actual 10239 MB Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /u01/install/oraInventory
‘DetachHome’ was successful.
Starting Oracle Universal Installer…

Checking swap space: must be greater than 500 MB. Actual 10239 MB Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /u01/install/oraInventory
‘DetachHome’ was successful.

Executing the command su applmgr -c perl adcfgclone.pl appsTier
Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA

Oracle E-Business Suite Rapid Clone

Version 12.2

adcfgclone Version 120.63.12020000.37
stty: standard input: Inappropriate ioctl for device

Enter the APPS password :
stty: standard input: Inappropriate ioctl for device
Running:
/u01/install/APPS/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /u01/install/APPS/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/java:
/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper -encryptpwd /u01/install/APPS/fs2/EBSapps/comn/clone/bin/../FMW/tempinfoApps.txt
stty: standard input: Inappropriate ioctl for device

Enter the Weblogic AdminServer password :
stty: standard input: Inappropriate ioctl for device
Running:
/u01/install/APPS/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /u01/install/APPS/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:/u01/install/APPS/fs2/EBSapps/comn/
clone/jlib/java:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper /u01/install/APPS/fs2/EBSapps/comn/clone/bin/../FMW/tempinfo.txt
Running:
/u01/install/APPS/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /u01/install/APPS/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:/u01/install/APPS/fs2/EBSapps/comn/
clone/jlib/java:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper /u01/install/APPS/fs2/EBSapps/comn/clone/bin/../FMW/EBSDataSource

Do you want to add a node (yes/no) [no] :

Running:
/u01/install/APPS/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -cp /u01/install/APPS/fs2/EBSapps/comn/clone/jlib/java:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/xmlparserv2.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/ojdbc6.jar:
/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/java:
/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.context.CloneContext
-e /u01/install/APPS/fs2/EBSapps/comn/clone/bin/../context/apps/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_15345.lst
-stage /u01/install/APPS/fs2/EBSapps/comn/clone 2> /tmp/adcfgclone_15345.err; echo $? > /tmp/adcfgclone_15345.res

Log file located at /u01/install/APPS/fs2/EBSapps/comn/clone/bin/CloneContext_0319070637.log

Target System File Edition type [patch] :
Enter the full path of Run File System Context file :
Provide the values required for creation of the new APPL_TOP Context file.

Target System Fusion Middleware Home set to /u01/install/APPS/fs2/FMW_Home

Target System Web Oracle Home set to /u01/install/APPS/fs2/FMW_Home/webtier

Target System Appl TOP set to /u01/install/APPS/fs2/EBSapps/appl

Target System COMMON TOP set to /u01/install/APPS/fs2/EBSapps/comn

Target System Instance Top set to /u01/install/APPS/fs2/inst/apps/CRP1_appshost

Target System Port Pool [0-99] :
Checking the port pool 1
done: Port Pool 1 is free
Report file located at /u01/install/APPS/fs2/inst/apps/CRP1_appshost/admin/out/portpool.lst
Complete port information available at /u01/install/APPS/fs2/inst/apps/CRP1_appshost/admin/out/portpool.lst

UTL_FILE_DIR on database tier consists of the following directories.

  1. /usr/tmp
    2. /usr/tmp
    3. /u01/install/PROD/11.2.0/appsutil/outbound/CRP1_dbhost
    4. /usr/tmp
    Choose a value which will be set as APPLPTMP value on the target node [1] : RC-00208: Error: Not a valid number

UTL_FILE_DIR on database tier consists of the following directories.

  1. /usr/tmp
    2. /usr/tmp
    3. /u01/install/PROD/11.2.0/appsutil/outbound/CRP1_dbhost
    4. /usr/tmp
    Choose a value which will be set as APPLPTMP value on the target node [1] : RC-00200: Error: Exception occurred while taking input from user

Creating the new APPL_TOP Context file from :
/u01/install/APPS/fs2/EBSapps/comn/clone/context/apps/adxmlctx.tmp

The new APPL_TOP context file has been created :
/u01/install/APPS/fs2/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml

Log file located at /u01/install/APPS/fs2/EBSapps/comn/clone/bin/CloneContext_0319070637.log
Check Clone Context logfile /u01/install/APPS/fs2/EBSapps/comn/clone/bin/CloneContext_0319070637.log for details.

Running Rapid Clone with command:
Running:
perl /u01/install/APPS/fs2/EBSapps/comn/clone/bin/adclone.pl java=/u01/install/APPS/fs2/EBSapps/comn/clone/bin/../jre mode=apply
stage=/u01/install/APPS/fs2/EBSapps/comn/clone component=appsTier method=CUSTOM appctxtg=/u01/install/APPS/fs2/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml showProgress contextValidated=true

FMW Pre-requisite check log file location : /u01/install/APPS/fs2/EBSapps/comn/clone/FMW/logs/prereqcheck.log

Running: /u01/install/APPS/fs2/EBSapps/comn/clone/FMW/t2pjdk/bin/java -classpath /u01/install/APPS/fs2/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/engine.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraPrereq.jar:
/u01/install/APPS/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraPrereqChecks.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraInstaller.jar:
/u01/install/APPS/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraInstallerNet.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/srvm.jar:
/u01/install/APPS/fs2/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl2.jar:
/u01/install/APPS/fs2/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl-log4j.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/xmlparserv2.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/share.jar:
/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/java oracle.apps.ad.clone.util.FMWOracleHomePreReqCheck -prereqCheckFMW -e /u01/install/APPS/fs2/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml -stage /u01/install/APPS/fs2/EBSapps/comn/clone -log /u01/install/APPS/fs2/EBSapps/comn/clone/FMW/logs/prereqcheck.log

Beginning application tier Apply – Thu Mar 19 07:06:48 2015

/u01/install/APPS/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /u01/install/APPS/fs2/EBSapps/comn/clone/jlib/xmlparserv2.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/ojdbc6.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/java:
/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/oui/OraInstaller.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/oui/ewt3.jar:
/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/oui/share.jar:/u01/install/APPS/fs2/FMW_Home/webtier/../Oracle_EBS-app1/oui/jlib/srvm.jar:/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:/u01/install/APPS/fs2/FMW_Home/wlserver_10.3/server/lib/weblogic.jar:
/u01/install/APPS/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar oracle.apps.ad.clone.ApplyAppsTier -e /u01/install/APPS/fs2/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml -stage /u01/install/APPS/fs2/EBSapps/comn/clone -showProgress -nopromptmsg
Log file located at /u01/install/APPS/fs2/inst/apps/CRP1_appshost/admin/log/clone/ApplyAppsTier_03190706.log
/ 100% completed

Completed Apply…
Thu Mar 19 07:25:07 2015

Looking for incomplete CLONE record in ad_adop_session_patches table

The CLONE record status is no rows selected

==========================================================
Enabling the Apps Tier Service Startup on Boot
==========================================================

==========================================================
Starting the Oracle E-Business Suite Application tier Services
==========================================================
Starting the Oracle E-Business Suite Application Tier Services
You are running adstrtal.sh version 120.24.12020000.10

The logfile for this session is located at /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adstrtal.log

Executing service control script:
/u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/scripts/jtffmctl.sh start
Timeout specified in context file: 100 second(s)

script returned:
dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

You are running jtffmctl.sh version 120.3.12020000.4

Validating Fulfillment patch level via /u01/install/APPS/fs1/EBSapps/comn/java/classes
Fulfillment patch level validated.
Starting Fulfillment Server for CRP1 on port 9300 …

jtffmctl.sh: exiting with status 0

.end std out.

.end err out.

dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

Executing service control script:
/u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/scripts/adopmnctl.sh start
Timeout specified in context file: 100 second(s)

script returned:
dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

You are running adopmnctl.sh version 120.0.12020000.2

Starting Oracle Process Manager (OPMN) …

adopmnctl.sh: exiting with status 0

adopmnctl.sh: check the logfile /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adopmnctl.txt for more information …

.end std out.

.end err out.

dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

Executing service control script:
/u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/scripts/adapcctl.sh start
Timeout specified in context file: 100 second(s)

script returned:
dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

You are running adapcctl.sh version 120.0.12020000.6

Starting OPMN managed Oracle HTTP Server (OHS) instance …

adapcctl.sh: exiting with status 0

adapcctl.sh: check the logfile /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adapcctl.txt for more information …

.end std out.

.end err out.

dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

Executing service control script:
/u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/scripts/adnodemgrctl.sh start -nopromptmsg
Timeout specified in context file: -1 second(s)

script returned:
dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

You are running adnodemgrctl.sh version 120.11.12020000.11

Calling txkChkEBSDependecies.pl to perform dependency checks for ALL MANAGED SERVERS
Perl script txkChkEBSDependecies.pl got executed successfully

Starting the Node Manager…
Refer /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adnodemgrctl.txt for details

adnodemgrctl.sh: exiting with status 0

adnodemgrctl.sh: check the logfile /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adnodemgrctl.txt for more information …

.end std out.
*** ALL THE FOLLOWING FILES ARE REQUIRED FOR RESOLVING RUNTIME ERRORS
*** Log File = /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/rgf/TXK/txkChkEBSDependecies_Thu_Mar_19_07_25_16_2015/txkChkEBSDependecies_Thu_Mar_19_07_25_16_2015.log

.end err out.

dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

Executing service control script:
/u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/scripts/adalnctl.sh start
Timeout specified in context file: 100 second(s)

script returned:
dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

adalnctl.sh version 120.3.12020000.2

Checking for FNDFS executable.
Starting listener process APPS_CRP1.

adalnctl.sh: exiting with status 0

adalnctl.sh: check the logfile /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adalnctl.txt for more information …

.end std out.

.end err out.

dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

Executing service control script:
/u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/scripts/adcmctl.sh start
Timeout specified in context file: 1000 second(s)

script returned:
dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

You are running adcmctl.sh version 120.19.12020000.3

Starting concurrent manager for CRP1 …
Starting CRP1_0319@CRP1 Internal Concurrent Manager
Default printer is noprint

adcmctl.sh: exiting with status 0

adcmctl.sh: check the logfile /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adcmctl.txt for more information …

.end std out.

.end err out.

dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

Executing service control script:
/u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/scripts/adadminsrvctl.sh start -nopromptmsg
Timeout specified in context file: -1 second(s)

script returned:
dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

You are running adadminsrvctl.sh version 120.10.12020000.9

Starting WLS Admin Server…
Refer /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adadminsrvctl.txt for details

adadminsrvctl.sh: exiting with status 0

adadminsrvctl.sh: check the logfile /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adadminsrvctl.txt for more information …

.end std out.

.end err out.

dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

Executing service control script:
/u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/scripts/admanagedsrvctl.sh start forms_server1 -nopromptmsg
Timeout specified in context file: -1 second(s)

script returned:
dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

You are running admanagedsrvctl.sh version 120.14.12020000.9

Starting forms_server1…

admanagedsrvctl.sh: exiting with status 0

admanagedsrvctl.sh: check the logfile /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adformsctl.txt for more information …

.end std out.

.end err out.

dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

Executing service control script:
/u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/scripts/admanagedsrvctl.sh start forms-c4ws_server1 -nopromptmsg
Timeout specified in context file: -1 second(s)

script returned:
dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

You are running admanagedsrvctl.sh version 120.14.12020000.9

Starting forms-c4ws_server1…

admanagedsrvctl.sh: exiting with status 0

admanagedsrvctl.sh: check the logfile /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adforms-c4wsctl.txt for more information …

.end std out.

.end err out.

dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

Executing service control script:
/u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/scripts/admanagedsrvctl.sh start oafm_server1 -nopromptmsg
Timeout specified in context file: -1 second(s)

script returned:
dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

You are running admanagedsrvctl.sh version 120.14.12020000.9

Starting oafm_server1…

admanagedsrvctl.sh: exiting with status 0

admanagedsrvctl.sh: check the logfile /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adoafmctl.txt for more information …

.end std out.

.end err out.

dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

Executing service control script:
/u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/scripts/admanagedsrvctl.sh start oacore_server1 -nopromptmsg
Timeout specified in context file: -1 second(s)

script returned:
dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

You are running admanagedsrvctl.sh version 120.14.12020000.9

Starting oacore_server1…

admanagedsrvctl.sh: exiting with status 0

admanagedsrvctl.sh: check the logfile /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adoacorectl.txt for more information …

.end std out.

.end err out.

dbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhostdbhost

All enabled services for this node are started.

adstrtal.sh: Exiting with status 0

adstrtal.sh: check the logfile /u01/install/APPS/fs1/inst/apps/CRP1_appshost/logs/appl/admin/log/adstrtal.log for more information …

===================INSTALLATION SUMMARY=============================
Oracle E-Business Suite Installation Top Level Directory : /u01/install/APPS
Oracle E-Business Suite Context File : /u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml
Oracle E-Business Suite Login Page : http://appshost.domain.com:8000/OA_HTML/AppsLogin
Oracle E-Business Suite Database Tier Host : dbhost.domain.com
Oracle E-Business Suite Database SID : CRP1
Oracle E-Business Suite TNS_PORT : 1521
==================================================================

Press any key to continue…
[root@appshost scripts]#

5. Run PreClone on Application Tier
[root@appshost ~]# su – applmgr

E-Business Suite Environment Information
—————————————-
RUN File System : /u01/install/APPS/fs1/EBSapps/appl
PATCH File System : /u01/install/APPS/fs2/EBSapps/appl
Non-Editioned File System : /u01/install/APPS/fs_ne

DB Host: dbhost.domain.com Service/SID: CRP1

E-Business Suite Environment Setting
————————————
– Enter [R/r] for sourcing Run File System Environment file, or
– Enter [P/p] for sourcing Patch File System Environment file, or
– Enter anything else to exit

Please choose the environment file you wish to source [R/P]:R

Sourcing the RUN File System …
[applmgr@appshost ~]$ cd $ADMIN_SCRIPTS_HOME
[applmgr@appshost scripts]$ perl adpreclone.pl appsTier

Copyright (c) 2011, 2014 Oracle Corporation
Redwood Shores, California, USA

Oracle E-Business Suite Rapid Clone

Version 12.2

adpreclone Version 120.31.12020000.16

Enter the APPS User Password:
Enter the Weblogic AdminServer password :

Checking the status of the Oracle WebLogic Administration Server….

Running perl /u01/install/APPS/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/adProvisionEBS.pl ebs-get-serverstatus -contextfile=/u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml -servername=AdminServer -promptmsg=hide

The Oracle WebLogic Administration Server is up.

Running:
perl /u01/install/APPS/fs1/EBSapps/appl/ad/12.0.0/bin/adclone.pl java=/u01/install/APPS/fs1/EBSapps/comn/util/jdk64 mode=stage stage=/u01/install/APPS/fs1/EBSapps/comn/clone component=appsTier method= appctx=/u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml showProgress

Setting the wls environment

Beginning application tier Stage – Thu Mar 19 09:47:15 2015

/u01/install/APPS/fs1/EBSapps/comn/util/jdk64/bin/java -Xmx600M -DCONTEXT_VALIDATED=false -Doracle.installer.oui_loc=/oui -classpath /u01/install/APPS/fs1/FMW_Home/webtier/lib/xmlparserv2.jar:/u01/install/APPS/fs1/FMW_Home/webtier/jdbc/lib/ojdbc6.jar:
/u01/install/APPS/fs1/EBSapps/comn/java/classes:/u01/install/APPS/fs1/FMW_Home/webtier/oui/jlib/OraInstaller.jar:
/u01/install/APPS/fs1/FMW_Home/webtier/oui/jlib/ewt3.jar:/u01/install/APPS/fs1/FMW_Home/webtier/oui/jlib/share.jar:
/u01/install/APPS/fs1/FMW_Home/webtier/../Oracle_EBS-app1/oui/jlib/srvm.jar:/u01/install/APPS/fs1/FMW_Home/webtier/jlib/ojmisc.jar:/u01/install/APPS/fs1/FMW_Home/wlserver_10.3/server/lib/weblogic.jar:
/u01/install/APPS/fs1/FMW_Home/oracle_common/jlib/obfuscatepassword.jar oracle.apps.ad.clone.StageAppsTier -e /u01/install/APPS/fs1/inst/apps/CRP1_appshost/appl/admin/CRP1_appshost.xml -stage /u01/install/APPS/fs1/EBSapps/comn/clone -tmp /tmp -method CUSTOM -showProgress -nopromptmsg

Log file located at /u01/install/APPS/fs1/inst/apps/CRP1_appshost/admin/log/clone/StageAppsTier_03190947.log

\ 20% completed

Completed Stage…
Thu Mar 19 09:55:17 2015
[applmgr@appshost scripts]$

  1. Take Cold Backup